Connect The Hardware - TP-Link DSL Guía De Instalación Rápida

Connect the Hardware

If you don't need the phone service, just directly connect the modem router to the phone jack with the provided
phone cable, then follow steps 3 and 4 to complete the hardware connection.
Phone Jack
1
PHONE MODEM
DSL Splitter
Phone Cable
Phone(Optional)
* Image may differ from actual product.
DSL WPS WiFi RESET LAN1
ON/OFF
2
Modem Router
LAN2 LAN3 LAN4/WAN POWER POWER
ON/OFF
3
Turn on the modem router.
4
Wait for 2 minutes. The Power and DSL LEDs
will be on and stable. If there is only one LED,
it will flash slowly instead.
Note: If the LED status is different, please refer to FAQ > Q2.
English
Power Jack
Power Adapter
5