cahors MINISAT Manual Del Usuario página 15

2) Set up the elevation angle (between angle bracket B1 and antenna body A1) after
fixing the main support B2 with angle body B1.
For delicate adjustment elevation and azimuth angle, please don't fix bolt and nut tightly.
N1
S2
3) Installation of Fix bracket A :
You need to install Fix Bracket A (B3) considering installation place (Clamp Type, Wall
Mounting Type). Make sure that direction should be toward satellite. In order to support
antenna, nut (N1) should be jointed as tightly as it can. Please purchase anchor bolts
separately for wall mounting installation.
B3
S4
6
S3
B1
S1
B2
B2
S4
N1
B4
B4
B1
Check 30
B3
Use anchor bolt.
It is not included.
Wall