Cleaning And Maintenance; Cleaning Care - Morphy Richards 47110 Manual Del Usuario

47110MEE Rev1:Layout 2
are pressed within 5 seconds the cup selection setting and
the start time are memorised.
5 To activate the automatic timer function, press the auto button
Î.
• The display will change to show the programmed time and
cup selection setting for 5 seconds. The display will then
change to show the time, the automatic timer function is set.
• With the automatic function activated, the coffee maker will
turn on at the desired time and start to brew the coffee.
• The time selected in the automatic brewing mode is when the
coffee maker will begin brewing. A full carafe of coffee (10
cups) will take approximately 8 minutes to brew.
NOTE:
• If the auto button Î is pressed during the automatic timer
function will be activated.
• If setting the automatic timer function during the brewing
process, wait until the process is complete before pressing
the auto button.
6 Press the auto button again Î to cancel the automatic
function, the timer function indicator will disappear. The
machine will keep in the memory the cup selection setting
and start time until it is unplugged from the mains socket.
7 To change the start time and the number of cups, repeat
steps 1-5.
WARNING: Remember to fill the water tank with water and
the filter with coffee before activating the auto function.
NOTE:
• The Clock is a 24 hour clock.
• If no buttons are pressed, the display will revert to the time
display within 5 seconds.
Cup selection function
1 This machine has a special selector that maintains the quality
of coffee brewed in relation to the number of cups selected.
There are two options available:
• (1-5 cups)
1/2 carafe
• 1 carafe (6-10 cups)
2 The selection needs to be set in relation to the amount of
water in the water tank and the amount of coffee powder in
the filter.
3 The incorrect selection of this function will not affect the
functionality of the machine, however the quality and taste of
the coffee brewed will be affected.
4 The cup selection function can also be used to achieve a
stronger or weaker cup of coffee.
• The following table shows the settings to use in relation to the
volume of water in the tank to help achieve a stronger or
weaker coffee. Feel free to experiment with different settings
until you achieve the desired strength of coffee to suit your
own personal taste.
24/8/09 15:31 Page 7
1-5 cups
1⁄2 Carafe Standard
1 Carafe Weaker

CLEANING AND MAINTENANCE

Refilling
1 Switch off the coffee maker, and allow 30 minutes to cool.
2 Press the water reservoir release button › to remove the
water reservoir and fill with the required amount of water
using the level indicator fl as a guide. Both the water and
level indicator are marked in cups A.
• The manual version of the ARC coffee maker features a quick
refill cap on the top of the unit B. Simply twist the cap to
unlock and fill with the required amount of water using the
level indicator as a guide.
Descaling
• If you live in a harder water area, we recommend that your
coffee maker is descaled at regular intervals, eg. every 2-3
months. In areas of moderately hard water, you should
descale every 6 months.
• If the water filters through more slowly than usual, it is a sign
that descaling is necessary.
• We recommend you to use proprietary liquid descaler which
is especially made for coffee makers and plastic kettles.
Follow the instructions on the bottle or sachet, and then
operate the coffee maker with just water 3 times before
making coffee.
• Do not use kettle descaler unless the packet specifically states
it is suitable for coffee makers.
NOTE:
• The permanent mesh filter should not be in place during
descaling.

Cleaning care

1 Unplug the coffee maker, and allow to cool.
2 Do not immerse the coffee maker in liquid.
3 Rinse the water tank occasionally with cold water. Do not use
a cloth, as any residue or lint left behind may clog the coffee
maker.
4 Remove the permanent filter ‰ and filter holder, discard the
used coffee grinds and wash with warm soapy water.
Extended soaking is recommended at the same time as
descaling. Rinse and dry thoroughly.
5 Wash the carafe in warm soapy water. Rinse and dry all parts
thoroughly.
NOTE: The carafe is NOT dishwasher safe.
6 Wipe all external surfaces with a damp cloth and dry
thoroughly.
• Care must be taken to ensure the non drip valve situated on
the bottom of the filter holder is not damaged during cleaning.
• Never use harsh or abrasive cleaners.
6-10 cups
Stronger
Standard
g
7