PIAA POWERSPORTS 510 Instrucciones De Instalación página 6

DRIVING LIGHT
AIMING
Visual aim is made with the center of the beam hot spot 1.5 inches below the
lamp center at 25 feet with the lamp facing straight forward. (see below.)
Do not use driving lights into oncoming traffic.
Driving lights should never be the only foreword light source.
Driving lights should only be used with the headlamp high beams.
FOG LIGHT
AIMING
Visual aim is made with the top of the beam 4 inches below the lamp center at
25 feet with the lamp facing straight forward. Some modifications to these
instructions may be necessary to minimize glare.
Only use fog lights if they are aimed properly.
Fog lights should never be the only forward light source.
Fog lights should be used with headlamp low beams.
Mounting positions and vehicles may vary.
Measure driving lamp down angle
at the center of the beam hot spot
Measure lamp height to center
25 feet
Mounting positions and vehicles may vary.
Measure lamp height to center
25 feet
6.
Level
Center of
hot spot
1.5" below
level line
Level
Four (4) inches
Top of
beam