MTX Audio RFL4120 Manual Del Usario página 2

Thank You !
Thank you for purchasing an MTX Audio High-End amplifier. Proper installation matched with MTX speakers and subwoofers provide
superior sound and performance for endless hours of waking the neighbors, slammin' your friends or flat out stomping wanna-be
players. Congrats and enjoy the ultimate audio experience with MTX !
Specifications :
• 4-Channel Class-AB amplifier
• CEA2006 certified Power Output :
- 200 Watts RMS x 4-channels at 2 ohm and THD+N ≤1%
- 120 Watts RMS x 4-channels at 4 ohm and THD+N ≤1%
- 400 Watts RMS bridged x 2 at 4 ohm and THD+N ≤1%
• Crossover :
- High pass 12dB/oct variable from 40Hz to 5000Hz
- Low pass 24dB/oct variable from 40Hz to 5000Hz
- Band pass 12dB-24dB/oct variable from 40Hz to 5000Hz
• Signal-to-Noise Ratio (1 Watt) : > 98dB
• THD+Noise (Distortion) (1 Watt) : ≤ 0,05%
• Frequency Response (±1dB) : 10Hz-90000Hz
• Maximum Input Signal : 6V
• Maximum Sensitivity : 200mV
• EBC remote control
• Dimensions : 525mm x 204mm x 59mm
GND REM +12V
25A 25A 25A 25A
Power Fuses
High Pass
Input
(+)
Ch.1 Ch.2 On
Off
40Hz - 5000Hz
Gain
6V - 0,2V 40Hz - 5000Hz
On
Off
(+)
Low Pass
Input
Ch.1 Ch.2 Ch.3 Ch.4
Speakers
(-) (+) (-)
Ch.1 Ch.2
Ch.3 Ch.4
Gain
6V - 0,2V
Bridge (-)
High Pass
Speakers
(+) (-) (+) (-)
Ch.3 Ch.4
On
Off EBC
40Hz - 5000Hz
Remote
40Hz - 5000Hz
On
Off
(+) Bridge (-)
Low Pass