Power Cord; Power Button - Bissell ZING 6489 Serie Guia Del Usuario

O
perations

Power cord

The power cord is located at the rear of the
vacuum. Gently pull out the power cord,
watching for the yellow line. Stop pulling the
power cord once the yellow line is visible.
There is also a red line, which indicates the
end of the usable cord. Do not pull the power
cord out beyond the red line.
Automatic cord rewind
Your vacuum is equipped with an automatic
cord rewind. When cleaning is finished, press
the power button OFF and grasp the plug to
disconnect from the electrical outlet. Hold
the plug and press the automatic cord rewind
button to rewind the cord automatically.

Power button

Turn the power ON or OFF by pressing lightly
downward on the power button (
6
w w w . b i s s e l l . c o m
Power
Button
).
NOTICE:
While vacuuming, certain types of
carpets and low humidity conditions
may generate small static discharges.
The discharges are entirely harmless
and are not associated in any way
with the main power supply.
Automatic Cord
Rewind Button
CAUTION:
Be careful to avoid injury as cord
retracts very quickly.
CAUTION:
Before using your vacuum, make
sure that the dirt cup and all filters
are in place. Do not operate
your vacuum without the dirt
cup and filters.
8 0 0 . 2 3 7 . 7 6 9 1