Introduction To Your New; Switching On The Machine; Advice On Electrical; Assembly - Robot Coupe CL 40 Manual De Instruccion

INTRODUCTION TO
YOUR NEW VEGETABLE
PREPARATION MACHINE
CL 40
The CL 40 is perfectly geared to professional needs.
It can perform any number of tasks, which you will
gradually discover as you use it.
The CL 40 is equipped with a stainless steel
vegetable bowl and a lid made in ABS (automatic
restart of the machine with the pusher).
The CL 40 is equipped with a range of 28 discs
for making slices, grating, julienne, dicing and
French fries.
Thanks to its simple design, all components
requiring frequent handling for maintenance or
cleaning can be fitted and removed in a trice
To make things easier for you, this manual gives a
breakdown of all the various fitting operations.
This manual contains impor tant information
designed to help the user get the most out of his or
her CL 40 vegetable preparation device.
We place special emphasis on those actions which
cause the machine to stop.
We therefore recommend that you read it carefully
before using your machine.
We have also included a few examples to help you
get the feel of your new machine and appreciate its
numerous advantages.
16
SWITCHING ON
THE MACHINE
• ADVICE ON ELECTRICAL CONNECTIONS
Before plugging in, check that your power supply
corresponds to that indicated on the machine's
identification plate.
W A R N I N G
This appliance must be plugged into an
earthed socket (risk of electrocution).
The machine comes with a single phase plug
connected to a power cord.
The CL 40 are fitted with various types of motors :
230 V / 50 Hz / 1
120 V / 60 Hz / 1
220 V / 60 Hz / 1
The vegetable preparation machine consists of two
detachable parts: the stainless steel vegetable
preparation bowl and the lid.
1) With the motor base
facing you, fit the bowl
onto the motor base; the
ejection chute should be
on your right.
3) Slot the black or white
plastic ejection tool onto
the drive shaft, checking
that it is correctly positio-
ned at the bottom of the
bowl.

ASSEMBLY

Two ejection tools:
The CL 40 is supplied with two ejection tools. The
white ejector has been specially designed to cope
with cabbage. For all other vegetables, use the
black plastic ejector disc.
Cabbage ejector
2) Turn the bowl to the
right until the motor base
connectors are securely
positioned in their soc-
kets.
Ejector disc