TP-Link 7106507032 Guia De Instalacion página 13

3
Secure the mounting bracket to the ceiling
tile using three M3x30 pan-head screws,
washers and wing nuts.
4
Attach the EAP/CAP to the mounting bracket
by aligning arrow (on the EAP/CAP) with
arrow (on the mounting bracket), then rotate
the EAP/CAP clockwise until it locks into
place.
5
Feed the Ethernet cable through the hole and
set the ceiling tile back into place. Connect
the Ethernet cable to the ETHERNET port.
Option3 ： Wall Mounting
■
Follow the steps below to install the EAP/CAP with the provided accessories:
M3×28 Plastic Wall Anchors
(Qty.4)
M3×20 Self-tapping Screws
(Qty.4)
English
10