Alcad 912-TP QPSK A PAL Guía Rápida página 4

QUICK PROGRAMMING GUIDE 912-TP QPSK TO PAL
OSD Menu
Ensure that the OSD menu for adjusting the video and audio parameters appears in your mea-
Programs list
Audio list
Audio level
Output format
Apply
Subtitles list
Apply
Invert dual
Invert
Information
Read information
Code
Serial number
Set the programming switch of the 912-TP module to the OFF position. The programming
suring equipment or on your television screen.
9120129
17-456
indicator light will now go out.
Select the desired channel by pressing the T key on the
OK+ +T
arrows. The list will appear in the OSD menu. Then press
T to transmit.
Select the desired audio by pressing the T key on the
OK+ +T
arrows. The list will appear in the OSD menu. Then press
T to transmit.
Select the desired audio level by pressing the T key on the
OK+ +T
+ and - symbols. Then press T to transmit.
Select the
pan&scan 4:3; or full screen 16:9) by pressing the T
OK+ +T
key on the arrows. Set the parameter and exit from the
submenu by pressing T on the Apply button. Then press
T to transmit.
Select the desired subtitles by pressing the T key on the
OK+ +T
arrows; then confi rm your choice by pressing T on the
Apply button. Then press T to transmit.
Press T to transmit if you wish to invert the dual audio
OK+T
carriers. Then press T to transmit.
Press T to transmit if you wish to read the code and serial
T
number of the 912-TP transmodulator.
desired TV output format (letterbox 4:3;
ENG