Possible Problems And How To Solve Them; Maintenance And Repairs - Medel FAMILY Manual Del Usuario

POSSIBLE PROBLEMS AND HOW TO SOLVE THEM

EN
The device does not switch on:
1. Make sure the plug is firmly fitted to the wall socket;
2. Make sure that the device has been operating within operating limits indi-
ca-ted in this instructions manual (30 min. ON/30 min. OFF).
The device does not nebulize, or it nebulizes very weakly:
1. Make sure that the ends of the air tube are fitted tightly onto the main unit
and onto the nebulizer;
2. Check whether the nebulizer is empty from medication or full of an exces-
sive medication quantity (MAX. 6ml);
3. Check whether the nebulizer nozzle is obstructed;
4. Check whether the air conduction cone is inserted (pic. C).
Should the device not start working properly again, address to
an authorized technical service centre or to MEDEL CUSTOMER
SERVICE.

MAINTENANCE AND REPAIRS

In case of failure, address to qualified personnel authorized by Medel S.p.A..
Never open the device. There are no user-serviceable parts within. The com-
pressor requires no lubrication or maintenance.
18
man family EN 13-22.indd 18 man family EN 13-22.indd 18 17-06-2008 15:30:19 17-06-2008 15:30:19