Programming Options - Python 4811P Guia Del Propietario

The learn routine Exits if any of the following occurs:
• The ignition is turned off.
• There is no activity for 60 seconds.
• The control button is pressed too many times.

Programming Options

Programming options control your system's normal operational set-up.
Most options do not require additional parts, but some may require
installation labor.
The following is a list of the programmable options, with the factory
settings in bold.
12, 24, or 60 minute run time. Your system can be programmed
•
to allow the vehicle to run for 12, 24, or 60 minutes when remote
started. Can be set up to minute increments by your installer.
Parking lights flashing or constant. Your system can be pro-
•
grammed to flash or turn on the parking lights constantly during the
entire remote start operation.
• Ignition switch controlled door locking on or OFF. With this feature
on, the doors will lock three seconds after the ignition key is turned
on, and unlock when the key is turned off.
Important: The door lock option must be installed for this feature
to work.
10
© 2015 Directed. All rights reserved.