Alcad GRF-411 Manual De Instrucciones página 10

P O R T E R O D I G I TA L - D I G I TA L D O O R E N T RY S Y S T E M S - P O R T I E R N U M É R I Q U E
Funcionamiento - Operation - Fonctionnement
Configure the entrance panel of the external entry point as the external panel (E) (See page 24). Configure the entrance panel of each building
as the main panel (P) (See page 22).
The function activating the electric lock from the entrance panels remains enabled at all times.
SYSTEM ON STANDBY
The telephones are inactive (communication with the entrance panel and door opening functions are disabled). If the handset of a telephone is
lifted, an uninterrupted tone will be heard.
SYSTEM ACTIVE.
Only the telephone whose code is identical to the code which has been entered will receive the call. Confirmation of the call on the entrance
panel. The call tone will be different for calls made from the panel of the external entry point and calls from the entrance panel of the building
of flats. If the handset of another telephone in the same building is picked up, intermittent tones will be heard. If the handset of the requested
telephone is off the hook or if the code does not correspond to any telephone, the panel will emit intermittent tones. When several telephones
are installed in the flat, all of them receive the call. The first telephone to be answered will establish communication with the the entrance panel.
Time setting to answer: Configurable (Position 7 from the configuration menu).
Maximum time setting for conversation: Configurable (Position 6 from the configuration menu).
During both these periods of time, the entrance panel display will show the code which has been entered. The panels of the other blocks will
remain on standby until a call has been made. If the call is made from the external point of entry, the entrance panel of the building where the
telephone is located will be deactivated (blocked). The display of this panel will show how much longer the panel will remain blocked.
.