16.2 Cleaning
Cleaning program „CLEAN"
Fill in water up to a maximum of 1/3 capacity and at 2-3 drops of cleaning solution. Choose
the cleaning program with button CLEAN and start with START.
The indicator will light up in the display and the device is working on highest speed level.
You can hear a signal tone when the end of program is reached. Press the stop button and
pull the plug from socket. Wipe the inner jar dry with a soft cloth.
Clean the surface of the jar and base with a soft cloth.
Lid, measuring cup (middle part of lid) and pusher can be cleaned under running water.
Dry all components with a soft cloth.
17 Troubleshooting
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
17.1 Security advices
► Repairs of electrical appliances must be carried out by qualified personnel who are
trained by the manufacturer.
► Repairs performed by untrained persons may result in considerable hazards for the user
and damage the machine.
17.2 Troubleshooting
Problem
The device does not
start.
The device has shut
down.
Ingredients were not
mixed. Food is too
thick.
► If above mentioned steps don't solve the problem, please contact your customer
service.
Caso B 3000 Touch
Attention
Solution
Please check whether the power plug is properly plugged.
Please check whether the device is assembled well.
The overheating or current overload has reacted.
Pull the plug, then press reset button below the device. Plug in again, if
device is working normally you can go on, if not pull the plug again. Let
the device cool down for at least 45 minutes. Now you can use the
device again.
When the food is thick start with a low speed and switch carefully to
higher speed. However if device cannot stir the ingredients, take the jar
from the base stir with the spatula until the mixture loosens and then
restart the mixing process.
Attention
45