Technical Specifications; Employer S Responsibilities - Porter & Cable US58 Manual De Instrucciones

1 6 . DON T OVERREACH. Keep proper footing
and balance at all times when using or
handling the tool. Fig. 10.
1 7 . FIRE FASTENERS
SURFACE ONLY:never into materials too hard
t o p e n e t r a t e . F i g . 11 .
1 8 . DO NOT DRIVE FASTENERS on top of
other fasteners, or with the tool at too steep an
angle: the fasteners can ricochet causing
personal injury.
1 9 . DO NOT DRIVE FASTENERS CLOSE t o
the edge of the workpiece. The workpiece is
l i k e l y t o s p l i t a l l o w i n g t h e f a s t e n e r t o f l y f r e e o r
ricochet causing personal injury. F i g . 1 2 .
2 0 . K E E P HANDS AND BODY PA R T S away
from area shown in Fig. 13, to avoid injury.
2 1 . NEVER USE
inoperable, missing or damaged. Do not alter or
remove trigger. Make daily inspections for free
movement of trigger.
Noise level . . . . . . . . . . . . . . . . . . . . .
A - Weighted sound impulse
power level . . . . . . . . . . 90.0 dB
P - Emission sound
pressure level . . . . . . . . . 77 dB

EMPLOYER S RESPONSIBILITIES

Employer must enforce compliance with the safety warnings and all other
instructions contained in this manual.
Keep this manual available for use by all people assigned to use this tool.
For personal safety and proper operation of this tool, read and follow all of
these instructions carefully.
INTO
TO O L IF TRIGGER i s

TECHNICAL SPECIFICATIONS

. . . . . .
Fig. 10
W O R K
Fig. 11
Fig. 12
Fig. 13
Typical Mean
e ff e c t i v e Acceleration . . . . . . . 1.3 m/s
4
3