Hamilton Beach 58164 Manual Del Usuario página 3

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

24. Before plugging cord into wall outlet, turn the control to OFF
( ). To disconnect cord, turn the control to OFF ( ). Then
remove plug from wall outlet.
25. Operating time cannot exceed 3 minutes for any accessory or
speed setting.
26. Be careful if hot liquid is poured into the blender as it can be
ejected out of the appliance due to sudden steaming.
27. Do not place on or near a hot gas or electric burner, or in a
heated oven.
28. Do not use appliance for other than intended purpose.
29. Keep hands and utensils away from moving chopping/mixing
blade and slicing/shredding disc while processing food to
reduce the risk of severe personal injury and/or damage to
the food processor. A rubber scraper may be used but ONLY
when the food processor or chopper is not running.
30. The chopping/mixing blade and slicing/shredding disc are
sharp. Handle carefully. Store out of reach of children.
SAVE THESE INSTRUCTIONS
31. To reduce the risk of injury, never place chopping/mixing
blade or slicing/shredding disc on the processor or chopper
motor shaft without bowl properly attached.
32. Be certain lid is securely locked in place before operating food
processor or chopper.
33. Never feed food into food chute by hand. Always use the
food pusher.
34. Do not attempt to defeat the processor or chopper lid
interlock mechanism.
35. Make sure the chopping/mixing blade and slicing/shredding
disc have come to a full stop before removing processor or
chopper lid.
36. Never use appliance for a longer period or with a larger
amount of ingredients other than that recommended by
appliance manufacturer. See section titled "Food Processing
Charts."
37. CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on
and off by the utility.
3

Publicidad

Tabla de contenido
loading

Tabla de contenido