Safety Information; Safety Standards - C-LOGIC 520 Manual De Instrucciones

C-LOGIC 520
1. Introduction
WARNING
To avoid electric shock or personal injury, read all safety information, warnings
and precautions before using the meter.
The equipment is a small, safe and reliable multi-meter with less than 3 ½ digits.
This multimeter can measure AC/DC voltage, DC current, resistance, diode,
continuity, and battery test. This tool is ideal for professionals and amateurs
alike.

2. Safety information

2.1 Safety standards

The multimeter complies with safety standards UL61010-1, CSA C22.2
No61010-1, CAT II 600V and pollution degree 2.
• The protection provided by the multimeter can only be guaranteed if all safety
procedures are strictly followed.
• The safety symbols on the multimeter are to warn of possible dangerous
situations. Care should be taken when measuring near the safety limits of
the multimeter.
• Never exceed the protective limit values indicated in the specifications of
each measuring range.
WARNING
Special attention should be paid to the use of the multimeter, as improper use
can cause electric shocks and damage the multimeter.
The usual measures of the safety regulations and operating instructions
must be observed during use. In order to make full use of its functions and to
ensure safe operation, please comply carefully with the use of this section.
If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be affected.
- 15 -
EN