C-LOGIC 520 Manual De Instrucciones página 17

C-LOGIC 520
2.3 Electrical symbols
Note: Important safety information, see instruction manual.
Caution, possibility of electric shock.
The equipment is protected at all times by double insulation or
reinforced insulation.
Conforms to UL STD. 61010-1, 61010-2-032, 61010-2-033;
Certified to CSA STD C22.2 NO. 61010-1, 61010-2-032, 61010-
2-033
Fuse must be replaced as per the specification herein
Earth (ground) terminal
Direct current
Alternating current
This product has been tested to the requirements of CAN/CSA
C22.2 NO. 61010-1, second edition, including amendment 1
CAT II Measurement Category II: is for measurements made on circuits directly
connected to the low voltage installation.
- 17 -
EN