Trademarks; Fcc And Ic Compliance Statement - Parrot Mambo Guía De Utilización Rápida

this user guide with technical standards, EN 301489-17, EN300328, EN71-1, EN71-2,
EN62115, EN50581 according to the provisions of the R&TTE Directive 1999/5/EC,
the ROHS Directive 2011/65/EU and the General Product Safety Directive 2001/95/EC.
The statement of compliance is available at the following address:
www.parrot.com/fr/ce/?parrot-mambo

TRADEMARKS

Parrot Mambo, Parrot Swing as well as their respective logos are trademarks of
Parrot Drones SAS.
Parrot and the Parrot logos are trademarks of Parrot S.A.
App Store is a trademark of Apple Inc.
Google Play is a trademark of Google Inc.
The Bluetooth name and logo are registered trademarks of Bluetooth SIG, Inc.
®
and any use of these trademarks by Parrot Drones SAS is done under licence.
All other trademarks mentioned in this guide are the property of their respective
owners.
WARNING REGARDING PRIVACY AND RESPECT FOR IMAGES
OF PROPERTY
Recording and broadcasting an individual's image without their permission may consti-
tute an invasion of privacy and you may be held liable. Ask permission before filming
people, especially if you intend to keep your recordings and/or broadcast them. Do
not broadcast degrading images which may affect an individual's reputation or dignity.
Recording and broadcasting the image of property without permission from its
owner and or any third party holding intellectual property rights on the property
may constitute a violation of the property's image rights and you may be held
liable. Ask permission from its owner and/or any third party with ownership rights.

FCC AND IC COMPLIANCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class
B Digital Device, pursuant to Part 15 of the FCC Rules / with Industry Canada
Licence-exempt RSS standard(s). These limits are designed to provide reaso-
nable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful in-
terference to radio communications. However, there is no guarantee that inter-
ference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC Rules / with Industry Canada
Licence exempt RSS standard(s). Operation is subject to the following two condi-
tions: This equipment may not cause harmful interference. This equipment must
accept any interference received, including interference that may cause unde-
sired operation. Modifications not authorized by the manufacturer may void the
user's authority to operate this device.
16