FAQ
FREQUENTLY ASKED QUESTIONS
Q1
Does the AiMesh router support Access Point mode?
A: Yes. You can choose to set the AiMesh router as router mode or
access point mode. Please go to web GUI (http://router.asus.com),
and go to the page Administration > Operation Mode.
Q2
Could I setup wired connection between AiMesh routers (Ethernet
backhaul)?
A: Yes. AiMesh system supports both wireless and wired connection
between AiMesh router and node to maximize throughput and
stability. AiMesh analyzes the wireless signal strength for each
frequency band available, and then determines automatically
whether a wireless or wired connection is best to serve as the inter-
router connection backbone.
Follow the setup steps to establish a connection between the AiMesh
1
router and node via Wi-Fi first.
Place the node in the ideal locations for best coverage. Run an Ethernet
2
cable from the LAN port of the AiMesh router to the WAN port of AiMesh
node.
AiMesh system will auto-select the best path for data transmission,
3
whether wired or wireless.
14