Introduction - Fujitsu fi-565PR Guia Del Usuario

Introduction

Thank you for purchasing the fi-565PR Imprinter
option for fi-5650C Color Image Scanner.
This guide explains how to install and use the imprinter.
(For further details about the functions and operations of
fi-5650C Image Scanner, refer to the "fi-5650C Image
Scanner Operator's Guide" included in fi-5650C User
Manual CD-ROM.)
This guide also contains other important information, such
as procedures for replacement of consumables. Keep this
guide in a convenient and safe place so that you can refer
to it whenever necessary.
We hope this manual will be helpful in your future use of
the fi-565PR Imprinter.
Manufacturer
PFU LIMITED
Imaging Products Division,
Image Products Sales Dept., Products Group
Solid Square East Tower
580 Horikawa-cho
Saiwai-ku, Kawasaki-shi
Kanagawa 212 - 8563
Japan
Phone: +81 (44) 540 - 4538
Trademarks
Microsoft, Windows, and Windows NT are
registered trademarks of Microsoft Corporation in
the United States and/or other countries.
Other product names are the trademarks or
registered trademarks of the respective companies.
How Trademarks Are Indicated In This
Manual
References to operating systems (OS) are indicated
as follows:
Windows 95: Microsoft
system.
Windows NT 4.0: Microsoft
operating system version 4.0
Microsoft
operating system version 4.0.
Windows 98: Microsoft
system.
Windows Me: Microsoft
Edition operating system.
Windows 2000: Microsoft
Professional operating system.
Windows XP: Microsoft
Professional operating system,
Microsoft
Edition operating system.
Where there is no distinction between the different
versions of the above operating system, the general
term "Windows" is used.
® ®
Windows 95 operating
® ®
Windows NT Server
® ®
Windows NT Workstation
® ®
Windows 98 operating
® ®
Windows Millennium
® ®
Windows 2000
® ®
Windows XP
® ®
Windows XP Home
Regulatory Information
FCC declaration
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual,
may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
-
Reorient or relocate the receiving antenna.
-
Increase separation between equipment and
receiver.
-
Connect equipment to an outlet on a circuit
different from that to which the receiver is
located.
-
Consult your dealer or an experienced radio/TV
technician.
FCC Warning: Changes or modifications not
expressly approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
Canadian DOC Regulations
This digital apparatus does not exceed the Class B
limit for radio noise emissions from digital
apparatus set out in the Radio interference
Regulations of the Canadian Department of
Communications.
This Class B digital apparatus complies with
Canadian ICES-003.
Le pésent appareil numérique n'ément pas de bruits
radioélectriques dépassant les limites applicables
aux appareils numériques de la classe B prescridtes
dans le Réglesment sur le brouillage radioélectrique
dicté par le ministere des Communications du
Canada.
Cet appareil numérique de la classe B est
conformme à la norme NMB-003 du Canada.
fi-565PR Imprinter Operator's Guide | 1