English; Troubleshooting Guide - Kenwood TOG800 Manual De Instrucciones

troubleshooting guide

Problem
Toaster does not
operate.
Carriage lever not
staying down.
Uneven Browning.
Toast colour too light
or too dark.
Burning smell or
smoke from slots.
Vertical white lines on
front face of toast.
Heating tube dimmed
in centre of tube.
If none of the above see "Service & Customer Care".

English

Cause
No power.
Glass panel not fitted or
closed correctly.
Toaster not plugged in.
1 Slice of bread being
toasted.
Bread slices of different
size, freshness or
thickness being toasted
at same time.
Wrong browning setting
used.
Crumb tray full.
Food particles stuck
to element or loose in
toasting slots.
Bread coming into
contact with the side
of the toaster. This is
more likely to occur with
thicker slices of bread.
The elements have been
adjusted to optimise the
heat distribution resulting
in the centre area looking
less bright.
7
Solution
Check toaster is
plugged in.
Check glass panel is
locked into position.
The lever will not stay
down unless the toaster
is plugged in.
For best results ensure
that the bread slices are
of an even thickness,
freshness and size.
In order to achieve
uniform browning we
recommend you wait a
minimum of 30 seconds
between each toasting
so that the control can
automatically reset.
Alternatively select a
lower setting when
additional toasting is
carried out.
Select a higher or lower
browning setting.
Refer to "hints" section.
Unplug before checking
the slots.
Remove any loose food
particles.
Remove and clean the
crumb tray.
Normal operation.
Normal operation.