General And Pressure V Alve - NEILPRYDE RS One Manual Del Usuario

GENERAL
Use original NeilPryde RS:One assembling and spare parts only.
PRESSURE VALVE
The "Valve" or "Pressure Release screw" (located at the front of the mast track)
compensates for the difference of air pressure between the inside and outside
of the board, mostly caused by extreme temperature or sun exposure.
The valve should be:
Closed for windsurfing.
-
Opened at all other times.
-
IMPORTANT: Make sure to store the board in a dry place after Pressure Valve
is opened, your board is not water proof with pressure valve open!!
05