General Safety Information; Work Area; Electrical Safety - RIDGID SEP-500 Manual Del Usario

SEP-500, SEC-400, and SEC-600 Sewage Pumps

General Safety Information

Safety is a combination of common sense, staying
alert and understanding how your sewage pump
works.
Safety Signal Words
DANGER
!
means if the safety information is not
followed someone will be seriously injured or killed.
WARNING
!
means if safety information is not fol-
lowed someone could be seriously injured or killed.
CAUTION
!
means if safety information is not fol-
lowed someone may be injured.
NOTICE
!
indicates important information, that
if not followed, may cause damage to the equipment or
flooding.
WARNING
!
Read and understand all instruc-
tions. Failure to follow all instructions listed below
may result in fatal electric shock, fire, property
damage, and/or serious personal injury.
SAVE THESE INSTRUCTIONS!

Work Area

DANGER
!
• Do not operate pump in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases, or dust.
• Keep by-standers, children, and visitors away
while installing pump. Distractions can result in
mistakes.
2

Electrical Safety

WARNING
!
• This pump must be plugged into an outlet,
properly installed, and grounded in accordance
with all applicable codes and ordinances.
Never remove the grounding prong or modify
the plug in any way. Do not use any adapter
plugs. Check with a qualified electrician if you
are not sure the outlet is grounded. If the pump
should electrically malfunction or break down,
grounding provides a low resistance path to carry
electricity away from the user.
• Electrical wiring must be performed by a quali-
fied electrician. Improper wiring could result in
fatal electrical shock.
• Do not abuse cord. Never use the cord to carry
the pump or pull the plug from an outlet. Keep
cord away from heat, oil, sharp edges, or mov-
ing parts. Replace damaged cords immediately.
Damaged cords increase the risk of electrical
shock.
• Pump must be plugged into an outlet recepta-
cle that includes a Ground Fault Circuit
Interrupter (GFCI). In the event of current leak-
age, a GFCI will trip, thus reducing the risk of seri-
ous injury or death from electrical shock.
Power
Cord
Figure 1
• Before using, test the Ground Fault Circuit
Interrupter (GFCI) to insure it is operating cor-
rectly. A GFCI reduces the risk of electrical shock.
• Do not use an extension cord. This increases the
risk of electrical shock. If necessary, install a prop-
erly grounded outlet closer to the pump.
Ridge Tool Company
Grounded
Grounding Outlet
Blade
TEST RESET