Logic3 NW804 Manual De Instrucciones página 3

Power Save ( Sleep Mode )
The keyboard features a power save mode on save battery power. There are 2 ways to enter the power
save mode when the keyboard is switched to the ON position.
1. No connection is made between the keyboard and receiver after 4 seconds
2. Once connected the keyboard is left idle for 10 minutes
To exit the power save mode press a button on the keyboard
Low – Battery alert function
When the battery life of the keyboard is low, the LED on the keyboard will begin to flash indicating the
current batteries need to be replaced.
WARNING: Please ensure that the batteries are inserted correctly. If they are inserted incorrectly , it may
cause personal injury as well as damage to your Keyboard.
Trouble Shooting.
Problem
Keyboard does not connect
LED indicator does not light up
Characters not displayed correctly on screen
White number & symbol characters on
keyboard are not being displayed on screen
Keyboard does not connect / fix to gamepad
Conformity
Herewith Logic3 plc declares that the device PS3 Wireless Keyboard, conforms with the relevant
requirements and standards of the 1999/5/EC directive. You may request a full declaration of conformity
from the contact details on the last page of this manual.
Should you have any setup problems with the PS3 Wireless Keyboard (PS919) please contact our
Technical Support Hotline on +44 (01923)471000 – National/International call rates apply or Email
support@logic3.com - Spare parts are available for some models at our website www.logic3.com
Fix
Check receiver is connected to the PS3
Check the power switch is moved to the ON position
Check the power switch is moved to the ON position
Check batteries are inserted correctly
Replace batteries
Check or Change Keyboard language settings within PS3
menu
Check the SYMB or FN button is being held when
pressing the White character key.
Please note the Keyboard is designed to connect to the
Official Sony PlayStation3 Gamepad or the Logic3 Stealth
Gamepads