Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ON
1 2
Push
Chime
Button
Setting
Setting
Figure 5
0
30 Sec.
Figure 6
Chime Setting
ON
1 2
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
Push Button Setting
Figure 7
4. Test range. Temporarily position push button where you
want it mounted. Press push button to verify chime and
push button work properly. If chime does not sound, see
Troubleshooting.
5. Mount push button. Use either screws or double sided
tape to mount push button.
• Screw Mounting: To mount with screws, remove
back of case by pushing in tab on bottom with a small
screwdriver (see Figure 1). Note: Remove material in
screw holes (if needed) before mounting with screws.
Attach back of case to door jamb or wall (see Figure
8). Snap front of push button on.
• Tape Mounting: When attaching push button using
double sided tape, make sure the surface of the door
jamb or wall is clean.
Figure 8
-4-
207351-01
Publicidad
Tabla de contenido
