Use And Operation; Description Of The Controls; Heating Plate Switching On And Off - Bartscher 296215 Manual De Instalación, Uso Y Mantenimiento

ENGLISH
5.

USE AND OPERATION

5.1.

Description of the controls.

The elements controlling the essential functions
are located on the control panel of the device.
A) Temperature controller: adjusts power
of electric heating plates
B) Oven thermostat controller: adjusts
temperature of the electric oven
C) Oven switch: activates upper, lower, or
both heating coils.
Front plates
position
GB
A
Power
Heating
5.2.

Heating plate switching on and off

During the first activation leave the heating plates
for heating without pots.
A) Start the automatic switch-off to turn on
the electrical connection.
B) Turn the temperature controller to position
1 to set the heating plate to minimum
power. The green control light (V) will
come on.
C) Turn the temperature controller right to
position "0" to switch off the heating plate.
Pos. 0
Rear plates Oven position
position
Oven
temperature
Pos. 1 Pos. 6
D) Green indicator light: indicates activated
power supply
E) White indicator light: indicates oven
heating
F) Red indicator light: indicates activation of
safety thermostats.
Oven position
Oven indicator
lights
B C
Heating coils
position
D) Then turn the temperature controller to
desired
corresponds to the highest power.
E) Turn the temperature controller to position
0 to switch off the heating plate. The
green control light (V) will go off.
F) Start the automatic switch-off to turn off the
electrical connection, when needed.
V
6
Oven temperature
range
D
E
Oven-
switch
F
position. Position "6"