Customer Service - Klein Tools ET140 Manual De Instrucciones

BATTERY REPLACEMENT
When the Low Battery indicator is displayed on the LCD,
the batteries must be replaced. the batteries must be replaced.
1. Loosen screw to remove
battery door
2. Remove and recycle
exhausted 9V battery.
3. Install new battery.
4. Replace battery door
and tighten screw.
To avoid risk of electric shock, do not operate meter while
battery door is removed.
Be sure meter is turned off and wipe with a clean, dry lint-free
cloth. Do not use abrasive cleaners or solvents.
Remove the batteries when meter is not in use for a prolonged
period of time. Do not expose to high temperatures or humidity.
After a period of storage in extreme conditions exceeding the limits
mentioned in the General Specifications section, allow the meter to
return to normal operating conditions before using.
Do not place equipment and its accessories in the trash.
Items must be properly disposed of in accordance with local
regulations. Please see www.epa.gov or www.erecycle.org
for additional information.
450 Bond Street Lincolnshire, IL 60069 1-877-775-5346
customerservice@kleintools.com www.kleintools.com
MAINTENANCE
.
7
CLEANING
STORAGE
WARRANTY
www.kleintools.com/warranty
DISPOSAL / RECYCLE

CUSTOMER SERVICE

KLEIN TOOLS, INC.
5