Monitor; Entrance Panel - Alcad KVS-30421 Manual Del Usario

MONITOR

When the connections have been made, connect the short length of cable from the monitor to the connections bracket
and attach it as shown in the illustration.
1

ENTRANCE PANEL

Attach the support of the entrance panel to the wall. Then slide the pushbutton identifi cation cards of the entrance panel
into place, and make the electrical connections.
1
3
ENG-14
2-WIRE KIT VIDEO DOOR ENTRY SYSTEMS
2
20mm
2
PUSHBUTTON IDENTIFICATION
CARDS:
You can use either the preprinted
cards which are provided or print
your own using the template
available
Support section of the Alcad web
site: www.alcad.net.
20mm
from the Technical