Important - miniland baby Steamy Manual Del Usuario

ENGLISH
THIS UNIT MUST ONLY BE USED IN A DOMESTIC SETTING, OR SIMILAR
AREAS IN KITCHENS IN WORKPLACE ENVIRONMENTS, HOTELS, AND OTHER
RESIDENTIAL LOCATIONS, NURSERIES, ETC. AND EXCLUSIVELY BY ADULTS.
4. DESCRIPTION AND BREAKDOWN OF THE PRODUCT
1. Hood handle
2. Steam outlet cover
3. Protective cover
4. Basket for accessories
5. Central post
6. Divider for baby bottles
7. Tray for baby bottles
8. Tongs to remove sterilised items
9. Main body of the steriliser.
10. AC plug
11. Time indicator
12. On button
13. Measuring cup
5. INSTRUCTIONS FOR USE
1. Before beginning any operation, the baby bottles, nipples, and accessories must be
clean, empty, and completely rinsed out before the sterilisation process.
2. Place the steriliser on a suitably flat surface, making sure that it is out of the reach of
children. The device must not be knocked or moved during the sterilising process.
3. Remove the hood (3), the basket (4), and the other accessories (5,6,7).
4. Pour 100 ml of water into the sterilisation tank (9).
5. Place the tray (7) in the sterilisation tank (9).
6. Place the empty baby bottles upside down in the tray for baby bottles (7).
7. Use the divider for baby bottles (6) by placing it in the central post (5).
8. Place the tray of accessories (4) on the device properly by fitting it to the central
post (5).
9. Place nipples and other accessories face down and open in the basket for
accessories (4).
10. Put the protective hood (3) in place.
11. Plug the cable (10).
12. Press the on button (12) to start the sterilisation cycle. During the time that it runs,
the display will show the remaining minutes until the process finishes.
IMPORTANT: Be careful of the hot steam which is released from the steam outlet valve.
NOTE 1: If there is not enough water to finish the sterilisation process, the device will
automatically turn itself off.
NOTE 2: Do not remove the lid during the sterilisation cycle.
13. After eight minutes have passed, device will emit a beeping noise for five seconds
to notify the user that the sterilisation process has terminated. From that moment,
the display (11) will display the number three, showing that the contents will remain
in a sterilised condition for up to three hours after the conclusion of the cycle if the
lid remains closed.
Therefore, when an hour has passed after sterilisation, the display will show a two,
meaning that for the next two hours, the contents will remain sterilised.
10