Blade Maintenance; Maintenance - Walmart HYPER TOUGH Manual Del Operador

MAINTENANCE

NOTE: To ensure long and reliable service, carry out the following maintenance regularly.
Check for obvious defects such as loose, dislodged or damaged blade, loose fixings and worn or damaged
components.
Check that covers and guards are undamaged and correctly fitted. Carry out necessary maintenance or repairs
before using.
For Battery tools
The ambient temperature range for the use and storage of tool and battery is 0 C-45 C.
o o
The recommended ambient temperature range for the charging system during charging is 0 C-40 C.
o o

BLADE MAINTENANCE

Always clean the cutting blades after operation and periodically lubricating the cutting blade.
Visually check the condition of the cutting edges of the cutting blade.
Ensure that the blade is covered with the blade guard supplied when not in use.
WARNING: Wearing of gloves is recommended when changing the blades
CLEANING/STORAGE
Clean the exterior of the machine thoroughly using a soft brush and cloth. Do not use water, solvents or pol-
ishes. Remove all debris, especially from the ventilation slots.
Store the machine in a secure dry place out of reach of children. Do not place other objects on top of the
machine.
14