Declaration Of Conformity - Skil 0780 Manual Original

★ Tool operates intermittently
- on/off switch defective -> contact dealer/service station
- internal wiring defective -> contact dealer/service station
- extension cord damaged -> replace extension cord
★ Dry chain
- no oil in reservoir -> refill oil
- vent in oil reservoir cap clogged -> clean cap
- oil passage clogged -> clean oil passage outlet
★ Brake does not stop chain
- kickback brake/run-down brake defective ->
contact dealer/service station
★ Chain/chain bar overheats
- no oil in reservoir -> refill oil
- vent in oil reservoir cap clogged -> clean cap
- oil passage clogged -> clean oil passage outlet
- chain is overtensioned -> adjust chain tension
- dull chain -> sharpen chain or replace
★ Tool vibrates abnormally
- chain tension too loose -> adjust chain tension
- dull chain -> sharpen chain or replace
- chain worn out -> replace chain
- chain teeth are facing in the wrong direction ->
reassemble with chain in correct direction
ENVIRONMENT
• Do not dispose of electric tools, accessories and
packaging together with household waste material
(only for EU countries)
- in observance of European Directive 2002/96/EC on
waste of electric and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol 8 will remind you of this when the need for
disposing occurs

DECLARATION OF CONFORMITY

• We declare under our sole responsibility that this product is
in conformity with the following standards or standardized
documents: EN 60745, EN 61000, EN 55014 in accordance
with the provisions of the directives 2006/95/EC,
2004/108/EC, 2006/42/EC, 2000/14/EC
• Technical file at: SKIL Europe BV (PT-SEU/PJE),
4825 BD Breda, NL
12.04.2011
NOISE/VIBRATION
• Measured in accordance with EN 60745 the sound
pressure level of this tool is 87 dB(A) and the sound power
level 107 dB(A) (standard deviation: 3 dB), and the vibration
4.7 m/s² (hand-arm method; uncertainty K = 1.5 m/s²)
• Measured in accordance with 2000/14/EC
(EN/ISO 3744) the guaranteed sound power level LWA
is lower than 110 dB(A) (conformity assessment
procedure according to Annex VI)
Notified body : KEMA, Arnhem, NL
Notified body identification number : 0344
• The vibration emission level has been measured in
accordance with a standardised test given in EN 60745;
it may be used to compare one tool with another and as
a preliminary assessment of exposure to vibration when
using the tool for the applications mentioned
- using the tool for different applications, or with different
or poorly maintainted accessories, may significantly
increase the exposure level
- the times when the tool is switched off or when it is
running but not actually doing the job, may significantly
reduce the exposure level
! protect yourself against the effects of vibration
by maintaining the tool and its accessories,
keeping your hands warm, and organizing
your work patterns
Tronçonneuse à chaîne
INTRODUCTION
• L'outil électrique est conçu pour scier le bois, comme
par ex. les poutres en bois, les planches, les branches,
les tronçons ainsi que pour abattre des arbres; il peut
être utilisé pour des coupes dans et contre le sens
des fibres du bois
• Cet outil n'est conçu pour un usage professionnel
• Vérifiez que le conditionnement contient toutes les
pièces présentées dans le schéma 2
• Lorsque des pièces manquent ou sont endommagées,
veuillez contacter votre distributeur
• Lisez attentivement ce manuel d'instruction avant
d'utiliser l'outil et conservez-le pour pouvoir vous
y référer ultérieurement 3
• Prêtez attention aux consignes de sécurité et aux
avertissements; ne pas suivre ces instructions peut
entraîner des graves blessures
SPECIFICATIONS TECHNIQUES 1
ELEMENTS DE L'OUTIL 2
A Capot
B Bouton de verrouillage
C Chaîne
D Guide
E Symbole sens de rotation et de coupe
F Pignon de chaîne
G Boulon de fixation
H Goupilles de positionnement du guide
J Goupille de tension de chaîne
K Bouton de régulation de la tension de chaîne
L Buse d'huile
M Couvercle réservoir d'huile
14
0780