General Electric IM-6D Instrucciones Para Instalación página 40

ICEMAKER INSTALLATION INSTRUCTIONS U , V or W (Cont.)
MOUNT THE ICEMAKER
9
or 12 depending on model) fits in the fill cup
opening
mounting screws
Make sure:
fill tube assembly
model) extends into the fill cup opening at the
refrigerator to make sure the fill tube has not been
pushed out of the back of the refrigerator).
uppermost position
THEN SECURELY TIGHTEN THE ICEMAKER
MOUNTING SCREWS.
INSTALL THE ICE BUCKET
10
Place the ice bucket
40
Installation Instructions
fill tube assembly
two
OFF.
11 12
B
D
8
ATTACH WARRANTY LABEL
11
A label
date of installation for warranty purposes. Apply it
to the back of the refrigerator.
KEEP THIS MANUAL
12
The warranty for the icemaker is printed in
this manual. Keep this manual with your
Refrigerator Owner's Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Water Valve Assembly
section.
49-60704-2