Dimas DS350V Manual De Instrucciones página 34

The electric motor turns, but the drill does not:
Squealing or grating noises from the gear box
Long sparks from the commutator
The motor does not turn when powered
The fuse has not blown, but the motor does not
turn in the "On" position (1/ON).
Before checking the electrics (inclu-
ding replacing the fuses), check that
the machine is disconnected.
32
17 Important advice
The manufacturer declines all respon-
sibility for loss or damage resulting
from misuse or any modification, alte-
ration or powering that does not
conform to the manufacturer's original
specifications.
At the operating station, the noise level
can exceed 85 db (A).
In this case, measures must be taken
for personal protection.
18 Repairs
S
A
V
19 Spare parts
See exploded view
20 Scrapping
In the event of deterioration and scrap-
ping of the machine, the following
items must be disposed of in accor-
dance with the requirements of the
legislation in force.
Main materials :
Motor:
Machine:
The instructions for use and spare parts found in this
document are for information only and are not binding.
As part of our product quality improvement policy, we
reserve the right to make any and all technical modifica-
tions without prior notice.