Electronic Equipment; Electronic Circuit Board; Serial Port; Backup Battery - EdilKamin LOGO Instrucciones De Uso

Ocultar thumbs Ver también para LOGO:

Tabla de contenido

Idiomas disponibles

LEONARDO

is a combustion safety and control system which allows optimal performance in all

conditions thanks to two sensors measuring the pressure level in the combustion chamber and smoke

temperature.

The detection of and subsequent optimisation of these two parameters is continuous in order to correct

operation anomalies in real time.

The LEONARDO

system offers constant combustion, automatically regulating the draft based on the

characteristics of the chimney ﬂ ue (bends, length, shape, diameter, etc..) and environmental conditions

(wind, humidity, atmospheric pressure, installations at high altitude, etc.).

The standards for installation must be respected.

LEONARDO

system is also able to recognise the type of pellets and automatically djust the ﬂ ow mo-

ment by moment to ensure the required level of combustion.

ELECTRONIC CIRCUIT BOARD

SERIAL PORT

The Dealer can install an optional on the AUX outlet for controlling the process of

switching on and off (e.g. telephone remote, local thermostat), located at the rear oh the

stove. Can be connected via special optional trestle (code 640560).

BACKUP BATTERY

A backup battery is found on the control board (3-Volt CR 2032 battery). Its mal-

function is indicated with the following messages (not considered a defect but due to

normal wear-and-tear): "Battery check".

For more detailed information, please contact the DEALER who has performed the ﬁ rst

1st ignition.