Inserting And Removing Burs - Dentsply Sirona Midwest Stylus Plus Instrucciones De Uso

5 Operation
38
Operating Instructions Midwest Stylus
5.3

Inserting and removing burs

IMPORTANT: Check the push button to make sure it moves freely!
NOTICE! Use only burs and diamond polishers that are sharp and
undamaged. Use clean burs and diamond polishers to avoid dirt in the
clamping system.
CAUTION! A loose or partially removed bur instrument can detach
itself from the head or break off. This may cause injury! Therefore, use
the high-speed handpiece only if the bur instrument is inserted at least
10 mm and is clamped securely in place.
® ®
Plus / Midwest Phoenix ™ /Pro
6607290 D3673.201.01.03.02