Kodak T 50 Auto Manual Del Usuario página 15

2. Insert the film cassette completely
into the film chamber (17).
• Make sure the Film Status
Indicator (FSI) on the film
cassette is at
for a new cassette.
• Do not force the film cassette
into the film chamber.
(#1 position)
3. Close the film door to start the
automatic film advance.
• The picture counter (30) in
the LCD panel (11) displays "1."
• After you close the safety-
interlocked film door, you
cannot open the door until
the film is completely rewound
into the film cassette.
13