10520xxx_Rev400_GA_NUK Mipu Tischpumpe BP7.book Seite 27 Donnerstag, 5. April 2018 12:52 12
be used at a distance less than 30cm (1ft)
from the electric breast pump. Failure to do
so may result in a reduction in the
performance of the equipment.
4 Designation of Components and functional Elements
1
Lug for shoulder strap
2
USB port for charging
(cover removable)
3
Pump unit
4
Tube
5
Protective cap
6
Filter (plus 1 replacement)
7
Tube connector plug
8
Tube connector on breast shield
9
Breast shield
10 Silicone cushion
11 Lip valve (plus 1 replacement)
12 Breast milk container
13 Mains adapter (breast pump must only be
used with the mains adapter included in
the delivery package)
14 USB cable
15 Feeding teat
16 Screw ring
17 Protective cap
18 Sealing disc
19 Stand
20 Shoulder strap
Control buttons of the pump unit
21 Memory button
22 Change suction rhythm
23 Reduce suction strength
Warning!
Modifications or extensions to the
device
recommended
mains adapter or USB cable) can
result in increased electromagnetic
interference
electromagnetic immunity of the
device and lead to a faulty operation.
(Figure A)
24 Increase suction strength
25 Pause button
26 Master power switch
+
First Choice
model display (LED)
The symbols light up when the appropriate
function is active.
27 Displays the suction rhythm
28 Memory function
Flashing: current pumping session is
being saved
Constant: saved pumping session is
running
29 Pause
30 Blow-dry function
31 Displays the suction strength
Nature Sense model display (LCD)
The symbols are displayed when the
appropriate function is active.
32 Displays the suction rhythm
33 Memory function
Flashing: current pumping session is
being saved
Constant: saved pumping session is
running
34 Displays the expression time
35 Blow-dry function
36 Displays the charge state of the
rechargeable battery
37 Error message
38 Displays the suction strength
27
or
the
use
of
non-
accessories
(E.g.
or
a
reduced