Care & Maintenance; Technical Data; Warranty Notice - ANSMANN AES 3 Manual De Instrucciones

4. Please ensure that all connected devices are on standby. If necessary put the devices on standby
manually.
5. Press the green "learn standby" button for 3 seconds. The PC Energy Saving Mains Socket will then
learn automatically the standby characteristics of the connected devices. This sequence of learning
will be indicated by a fast blinking (approx. 2 times per second) of the red operating button.
When the learning process is finished the PC Energy Saving Mains Socket automatically switches
into disconnecting mode. This mode will be indicated by slow blinking (approx. 1 time per second)
of the operating button. The connected devices will be cut-off from mains power after one minute
in disconnecting mode. Thanks to intelligent Zero Watt Technology the PC Energy Saving Mains
Socket disconnects itself from the mains and does not waste any electricity (0 Watt).
6. To use your device as usual press the red operating button for approx. 3 seconds. All devices
connected to the PC Energy Saving Mains Socket are now ready for operation. The operating button
lights permanently red as soon as one of the connected devices is taken from the standby mode
into operation mode. After the device had been restored to standby mode, the PC Energy Saving
Mains Socket recognizes this and switches into disconnecting mode, which means that the
operating button is blinking red and after one minute there will be the automatically mains cut-
off.
EniViROnMEntAl nOtES
Do not dispose of this product into the normal household waste. Please return to your dealer or nearest
recycling centre or collection point. Please note the current applicable regulations. In case of doubt contact
your recycling centre. Please recycle all packing materials properly.
CARE & MAintEnAnCE
To make sure the PC Energy Saving Mains Socket works properly, please keep the contacts free from dust and
contamination. To clean the unit disconnect it from the mains and use only a dry cloth.

tECHniCAl dAtA

Connection:
Load:
Adaptive standby load:
Power consumption:
diSClAiMER
Information contained in this operating instruction may be changed without any prior notice. ANSMANN cannot
accept liability for direct, indirect, accidental or other claims or consequential damages originated by using the
information given in this operating instruction or from use of this product.

WARRAntY nOtiCE

We hereby offer a 3 year warranty on this product. This does not apply to damages caused by non-observance
of the operating instruction or physical damage due to lack of proper care.
Technical details are subject to change without prior notice. No liability accepted for typographical errors or omissions.
10/2009
230V AC / 50Hz
max. 2500W / 10A
max. 70W
0W in standby mode (after power cut-off)