Tabla de contenido
Publicidad
USING
1. How to register (pair) or deregister (unpair)
6
How to register (pair) the Magic Remote
To use the Magic Remote, first pair it with your TV.
1. Put batteries into the Magic Remote and turn the TV on.
2. Point the Magic Remote at your TV and press the
(OK) on the remote control.
- If the TV fails to register the Magic Remote, try again after
turning the TV off and back on.
How to deregister (unpair) the Magic Remote
Press and hold the
same time for five seconds, to unpair the Magic Remote with
your TV.
ꔈ Pressing and holding the
cancel and re-register Magic Remote at once. (In some TV
models, use
(HOME) and
button will let you
button.)
WHEEL
buttons at the
Publicidad
Tabla de contenido
