NSK Ultimate XL-F Manual De Uso página 7

7. USE PROPER EXTENSION CORD. Make sure your extension cord is in good condition.
When using an extension cord, be sure to use one heavy enough to carry the current your
product will draw. An undersized cord will cause a drop in line voltage resulting in loss of
power and overheating. Table (below) shows the correct size to use depending on cord
length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the
gauge number, the heavier the cord.
8. Install equipment so that the power supply cord can be pulled out without hindrance in event
of emergency. Do not place anything within 10 centimeters around the unit.
Ampere Rating
Not More Than
More Than
6
0
10
6
12
10
16
12
B. OTHER WARNING INSTRUCTIONS
and adjusting wrenches are removed from tool before turning it on.
present.
designed.
designed.
bracelets, or other jewelry that might get caught in moving parts. Nonslip footwear is
recommended. Wear protective hair covering to contain long hair.
lenses, they are NOT safety glasses. Also use face or dust mask if cutting operation is
dusty.
Minimum gauge for cord
7.5m(25ft.) 15m(50ft.)
15m(50ft.) 30m(100ft.)
Cord Number
#18 #16
#18 #16
#16 #16
#14 #12
3
30m(100ft.) 45m(150ft.)
60m(200ft.) 90m(300ft.)
#16 #14
#14 #12
#14 #12
Not Recommended