Powermatic PM3000B Manual De Instrucciones De Operación Y Piezas página 7

Dust collection
Dust port outside diameter
Recommended minimum extraction volume
General Dimensions
Base footprint
Shipping dimensions, saw only, L x W x H
Assembled, w/ extension wings only, L x W x H
Assembled, with 50-in. rail set, wood ext. table
L x W x H
Weights
Saw only – net weight (approx.)
Saw only – shipping weight (approx.)
1
Note: For 460V operation, an overload relay (Part No.
installed. A qualified electrician is recommended.
2
subject to local/national electrical codes.
3
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks
involved only.
L = length, W = width, H = height, D = depth
n/a = not applicable
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, Powermatic reserves the right to change specifications at any time and without prior notice,
without incurring obligations.
4" (101.6 mm)
600 CFM (17 CMM)
26-3/4 x 32-3/16 in. (680 x 818 mm)
32-1/4 x 44-11/16 x 43-1/2 in. (845 x 1135 x 1105 mm)
48 x 38 x 42-7/8 in. (1219 x 965 x 1089 mm)
84-11/16 x 46-1/2 x 42-7/8 in. (2151 x 1183 x 1089 mm)
467 lb. (212 kg)
600 lb. (273 kg)
PM3000B-2107AOR
) must be purchased separately and
7