Safety Requirements - PolyVision a3 CeramicSteel Flow Manual Del Usuario

English
3

Safety Requirements

4 Handling + Storing of Panels
5
Required Materials + Equipment
6 1830 Vertical Wall Bracket Positioning
7
2420 Vertical Wall Bracket Positioning
8 1830 Horizontal Wall Bracket Positioning
9 2420 Horizontal Wall Bracket Positioning
13 Warranty
Doc # 143200 | Rev A | Page 2 of 38
Safety Requirements
a CeramicSteel Frameless Flow - Wall Mounted
3
Dry Erase Board, Non-Seismic Applications
The building's Engineer of Record must be
consulted to determine if there are any seismic
requirements.
Doc # 143200 | Rev A | Page 3 of 38
Verify Wall Construction
CAUTION! Adequate wall construction is
required to support the weight of the board.
Minimum wall construction must be capable
of supporting weight amounts listed in Table
1 on page 4.
Minimum Required Wall Construction
Drywall with metal studs:
• Must be at least 0.6 mm (.02") thick Metal
stud 48.8 mm x 50 mm (1.92" x 1.97")
• Studs on maximum 600 mm (24") centers
• Must be at least 2 x 12,5 mm (.49") Type X
gypsum drywall
• 35 mm (1.34") drywall screws on 250 mm
(12") centers
Drywall with wooden studs:
• Stud grade SPF, DF-L or Hem-Fir 45 mm
x 70 mm (1.5" x 3.5")
• Studs on 600 mm (24") centers
• Must be atleast 25 mm (5/8") thick Type X
gypsum drywall for the US or 2 x 12,5 mm (1/2")
for EU
• 35 mm (#6 x 1-1/4") drywall screws on 250 mm
(12") centers