Electrolux EW27SO60LS Guia De Inicio Rapido página 3

MICROWAVE WALL OVEN INSTALLATION INSTRUCTIONS
MICROWAVE WALL OVEN INSTALLATION
Two persons are required to install the oven. Never
hold the door handle when moving the oven.
3. Place the oven adjacent to the opening on a table or
stand. Plug the power supply cord into the electrical
outlet. Carefully guide the oven into the prepared
opening. Avoid pinching cord between oven and wall.
See Figure 4. Push the unit in and against the cabinet.
The oven side bracket will clip into the Anti-Tip brackets.
See Figure 3.
4. To pull out the oven for servicing, open the door and
locate the two holes on the side frame. Simultaneously
insert the tools provided with the appliance in both
holes and pull the oven towards you. See Figure 5.
FINISHED ANTI-TIP BRACKET INSTALLATION
Figure 4
ANTI-TIP BRACKET INSTALLATION
Cutout Width
(See dimensions below)
Anti-Tip Brackets
16-1/2"
(41.9 cm)
EW27SO60LS Cutout Width
25-1/8" (63.8 cm) Min.*
25-5/8" (65.1 cm) Max.*
25-3/8" (64.5 cm) Recommended*
EW30SO60LS / E3OM075HSS / E3OM075HPS Cutout Width
28-1/2" (72.4 cm) Min.*
29" (73.7 cm) Max.*
28-3/4" (73.0 cm) Recommended*
REMOVING OVEN FOR SERVICING
Anti-Tip Bracket
installed in cabinet
Oven
Bracket
Oven
E3
Cutout Height
21" (53.3 cm) Min.*
21-1/2" (54.6 cm) Max.*
Figure 3
Oven removed
from the cabinet
Cabinet
Anti-Tip
Bracket
released
Right Side
Tool supplied
Figure 5