Whirlpool W11050563 Instrucciones De Instalación página 5

5.
Stand dryer up and slide to front
of washer
Lift the dryer back to an upright position, keeping it on the
covering. Use the covering to slide the dryer to the front of
the washer to avoid damaging the rubber feet.
6.
Place dryer on washer
Rear of dryer and washer
Lift the dryer up and set it securely on top of the washer.
Position the dryer so the front and sides are flush with those
of the washer. The rear of the dryer will overhang the rear
of the washer.
7.
Install brackets
Fasten
to dryer
last.
Fasten
to
washer
first.
Rear of dryer and
Rear of dryer and washer
Fasten the brackets as shown, one on each side, with the
screws provided.
NOTE: Fasten the brackets to the washer before fastening
to the dryer. This ensures the brackets align correctly with
the holes in the dryer.
IMPORTANT: When moving the stacked washer/dryer into
its final location, hold onto both the washer and the dryer
to ensure the brackets remain secure.
Fasten
to dryer
Fasten
washer
first.
washer
last.
to
5