Tabla de contenido
Publicidad
Climbing Rocks
1. Mark locations of Climbing Rocks on the Climbing Wall in a
pattern that will easily allow your child to climb to the deck.
Make sure the bolt hole locations are clear of wall supports
before drilling.
2. Drill holes through the wall at the desired locations using a
3/8" drill bit. Install Climbing Rocks as shown in (Fig. 19) and
(Fig. 19a).
3. Make sure the Climbing Wall and Climbing Rock connections
are secure before allowing any children to play on the
Climbing Wall.
Climbing Rocks
Fig. 19
PineBluff Assembly Instructions
(4) Climbing Rocks
Fig. 19a
(2) 1-1/2'' Hex Head Bolts
21
(2) 1/4" T-Nuts
3/8" Holes
Rock
(1) 1/4'' Loc Washer per bolt
(1) 1/4" Flat Washer per bolt
Publicidad
Tabla de contenido
