Functional Elements And Controls - Rotwerk RB 13 Instrucciones De Uso

GB DE
There is electrical equipment inside
the machine. Regularly check the
mains power cable, the extension
cables and the housings of electrical
components. Have damage repaired
by an accredited electrician.
• Protect the mains power cable!
Do not use the mains power cable for
purposes for which it was not intend-
ed. Do not use the cable to pull the
plug out of the wall socket. Protect
the cable against heat, oil and sharp
edges. Never work with a damaged
power cable.
storage, care and maintenance
• Keep unused tools in a safe place!
Unused tools should be kept in a dry,
locked location, out of reach of chil-
dren.
• treat tools with care!
Keep tools sharp and clean, and keep
handles dry and clean. This will en-
able you to work more efficiently and
more safely. Follow the maintenance
instructions and the instructions on
tool changing.
• Repairs by specialist staff
Repairs may only be carried out by
a specialist workshop or by qualified
specialist staff.
20
FunCtIonAl ElEMEnts AnD
ContRols
overview
A
1 Protective cover, belt housing
2 Speed chart
3 Emergency-stop switch
4 ON button
5 OFF button
6 Drilling spindle with MT 1 mount
7 Drill chuck with tapered mandrel
MT 1 / B 16
8 Plate
9 Machine base
10 Fixing holes (6 x)
11 Flange for column attachment
12 Fixing screws (3 x)
13 Plate holder
14 Column
15 Drill chuck guard
16 Clamping screw for drill chuck
guard
17 Drilling depth stop with scale
18 Motor adjuster lever
B
19 Screw, protective cover
20 Advance knob
21 Drilling head fixing screw
22 Clamp for motor adjuster
23 Motor
24 Plate height adjuster locking lever
25 Plate locking screw
26 Cable gland with plastic guard
27 Power cord
C
28 Safety switch
29 Front pulley