Publicidad
Idiomas disponibles
Idiomas disponibles
18. To open the gate, press the latch button
downwards with thumb as shown in figure 18,
while simultaneously lifting the latch spindle
out of the cup and rotating the gate open.
When closing the gate, ensure that the upper
and lower latch spindles are seated in their
respective cups (see figure 14b). Verify that
the upper latch release button prevents the
gate from being opened unintentionally.
Removal and reinstallation
19. If you wish to temporarily remove the gate,
remove the screws holding the upper and lower
hinge pins in place. Insert a small bladed
screwdriver in the screw hole and gently pull
upward and inward to disengage the hinge pin.
The gate may now be removed from its
installation position. Save the screws and hinge
pins in a safe location for later reuse.
When reinstalling the gate, please be certain to
reinstall the hinge pins safely by following
step 16 completely.
CARE:
CLEANING: Clean the safety gate using war m water and a mild detergent. Use a soft cloth or
sponge to avoid scratches. Never use solvents or chemicals to clean the safety gate.
Impor tant Safety Cautions:
1. Do not use the product if any components are broken or missing. Do not use replacement par ts
other than those approved by the manufacturer or distributor. Non-approved spare par ts may
render the repair or the product unsafe.
2. Check regularly that all fittings and components are secure and that no components are wor n,
broken or missing.
3. Check regularly that all fittings are securely tightened and that the locking mechanism is
working properly.
Distributed exclusively in the United States by
North States Industries, Inc.
1507 92nd Lane N.E.
Blaine, MN 55449
www.northstatesind.com
Manufactured in
Guang Dong, China
Page 8
Publicidad
