Bimar VT355 Folleto De Instrucciones página 15

USE
Warning: the fan can only be used if completely and properly assembled.
The fan has the following adjustment and control devices:
Tilting (high-low) of the main unit: turn the motor head up or down
-
to adjust the angle
Running the fan: selecting speed (
-
max - : silent) turn the knob to the required position; the knob is
backlit when the appliance is running. To stop the motor, press the
"0" button.
Horizontal swing (right-left): controlled with knob (2) on the motor
-
head. To keep the fan in a fixed position, pull the knob up.
To start the fan, plug it into the mains and choose the required speed.
To turn the fan off, turn the switch to "0" and thereafter remove the plug
from the mains.
1) Front grid/protective screen
2) Plastic outer ring
3) Grid ring nut
4) Back grid
5) Motor shaft
6) Swing function button
7) Motor head
8) Base
9) Selector switch
10) Fan
11) Screw with nut for securing
grids
12) Fan ring nut
: 0- : min -
15
: med - :