Troubleshooting - NewAir NWC028SS01 Manual Del Propietário

TROUBLESHOOTING

You can solve many common problems easily, saving you the cost of a possible
service call. Try the suggestions below to see if you can solve the problem
before calling the service technician.
Problem
Appliance is not
running
Appliance is not
cold enough
The compressor
starts and stops
frequently
LED lights do not
operate
Vibration
The appliance
mates a lot of
noise
The door does not
close properly
www.newair.com
Possible Causes and Solution
• Appliance is not plugged in.
• Appliance is not turned on.
• Check voltage of the installation.
• Check if the circuit breaker or the fuse has blown.
• Check the temperature control setting.
• Check if ambient temperature is beyond appliance operating
temperature.
• The door is opened too frequently.
• The door is not closed properly.
• The door is not sealing properly.
• Insufficient free space around the appliance.
• The external temperature is high.
• A large quantity of bottles has been put into the cellar.
• The appliance is opened frequently.
• The door is not properly closed.
• The cellar has not been correctly set.
• The appliance is not plugged in.
• The fuse has blown.
• LED lights are broken.
• The light switch is off.
• Check and ensure that the appliance is level
• The rattling noise may come from the flow of the refrigerant,
which is normal.
• At the end of a cooling cycle, you can hear the noise of water
circulating.
• Expansion and contraction of the internal walls may cause a
cracking sound.
• The appliance is not level.
• Check if fan is in good condition.
• The appliance is not level.
• The door seal is dirty or damaged.
• The shelves are not positioned correctly.
• A part of the contents is preventing the door from closing.
EN
17