Nacon GM-300 Manual De Instrucciones página 5

Macro Setting
Macros are a recorded set of combined key and button inputs which can be executed by just pressing one button
of your mouse.
To record a new macro, you fi rst need to give it a name which you enter in the according window in the column
"Record option". Then press "New". The macro will now appear in the list of macros on the left and is highlighted.
f
Select "Start recording" and confi rm the appearing message box. At this point every input from keyboard or
mouse will be recorded until you click on "Stop recording".
Note the column "Key Press Sequence" which holds all the recorded inputs as well as the time between pressing
and releasing a key. These times can be edited by double-clicking on the value which you want to change.
You can also insert a specifi c mouse event by choosing it from the according menu on the right side.
If you need your macro to be executed more than once, then you can specify the number of repetitions in the
"Loop Times" fi eld.
After everything has been recorded and set up, you need to press "Confi rm" to save the macro. Now it is available
in the list of macros in the "Key Settings" menu on the "Basic Settings" page.
Troubleshooting
• My mouse does not install correctly after I´ve plugged it into the USB slot.
o Unplug your mouse from your PC wait a while and after that plug it into a diff erent USB slot.
• The tracking of my NACON GM-300 does not work properly
o The performance of the optical sensors may decrease depending on which surface you use your NACON
GM-300 on, as some materials refl ect the light of the sensor better than others. The best performance
should be achieved on mouse mats.
o After some time of usage, dirt and dust may get trapped in the sensor window and can negatively impact
the performance. Freeing the window from dirt should solve that.
Recycling
This product should not be disposed of in normal household rubbish. Please take it to a nomi-
nated collection point.
Recycling is important and will help to protect our environment from reduced landfi ll waste.
Important Safeguards & Precautions
1. This Unit is for indoor use only. Never expose to direct sunlight or wet weather conditions.
2. Do not expose the unit, to splashing, dripping, rain or moisture. Do not immerse in liquid.
3. Do not expose to dust, high humidity, high temperatures or mechanical shock.
4. Do not use if the equipment is damaged.
5. Do not disassemble; there are no serviceable parts inside.
6. For external cleaning, use a soft, clean, damp cloth only. Use of detergents may damage the fi nish and leak
inside.
Scrolling Speed
This setting refers to the number of lines a page (e.g. in a brow-
ser) moves up- or downward if you turn the mouse wheel one
click. You can even let the wheel scroll entire pages by checking
the corresponding box.
Double-Click Speed
The double click speed lets you set the speed at which clicking
the left mouse button twice gets recognized as a double click by
the system.
Hint: Clicking the "Default" button resets all values.
EN
n
GM-300